CANtouch

Handheld diagnostic device for the physical and logical analysis of CAN bus systems

CANtouch® is a battery-operated handheld diagnostic device for the physical and logical analysis of CAN, CANopen, DeviceNet or SAE J1939 systems.

Its state-of-the-art operation via touch screen provides intuitive and efficient handling similar to the operation of smart-phones. As a further development of the CAN-Bus-Tester 2, it possesses not only its functionality, but, in addition, provides new measuring functions. A simplified evaluation method based on a combination of traffic lights and smilies will assist you in quick assessment of the measurement results. Thanks to the integrated update option, you are already prepared for future extensions today. New functions can be enabled by purchasing additional licenses at any time.

Features and benefits

  • Supported protocols: CAN, CANopen, DeviceNet, SAE J1939
  • Baud rates (10 kBit/s … 1 MBit/s)
  • Measurements designed as Apps
    – Bus Status (Bus traffic load)
    – Bus Errors (Active and passive frame errors)
    – Bus Voltages (CAN supply voltage and shield voltage)
    – Common Mode Voltage
    – CAN Levels (absolute / differential)
    – Bus Wiring (Short-circuits, interruptions, loop resistances, cable length)
    – Node Measurement (Quality level, Dist.-free voltage range, Edge steepness, Oscilloscope disp.)
    – Protocol Monitor
    Including six apps, three additional apps via license

Fields of Application

  • Commissioning of CAN bus systems
  • Wiring test, module check
  • Service/maintenance of CAN bus systems
  • Troubleshooting and analysis of the bus characteristics
  • Development of CAN modules
  • Final testing in the production

Technical specifications

Languages English, German
Bus systems (CAN type) CAN (ISO11898-2), CANopen (CiA301), DeviceNet (EN 50325-2), SAE J1939
Bit scanning 64 times, 10240 sampling points
Supported baud rates > 10; 20; 50; 100; 125; 250; 500; 800; 1000 kbit/s;
> Additional user defined: 5; 33.3; 62.5; 75; 83.3; 200 kbit/s;
> Automatic recognition via baud rate scan, bit timing adjustable
Power supply and battery > Built-in: Rechargeable lithium-ion battery
> External power supply: SELV DC 14 V; operation only via included 35 W wide range power supply
> Duration: Standby: up to 500 hrs.; Activated: Up to 36 hrs.; Measurements: up to 6 hrs.
> Charging times: fast charge to 80 % in about 1 hr.; fully charged in about 2 hrs.
Housing Aluminum housing, cover glass
Operating temperature 5 °C … 40 °C
Protection IP20 according to EN 60529
Dimensions/Weight 186 x 102 x 37 mm; about 860 g

Technology Partners