iPC-I XC16/PCI Active PCI board 1-2 x CAN (High-/Low-Speed)

The iPC-I XC16/PCI is an active CAN PCI interface for 5 V and 3.3 V PCI bus systems with optional Low-Speed bus interface. The on-board microcontroller offers filtering, preprocessing, transmission and time stamped storage of the CAN messages.

Features and benefits

  • Active CAN board with 8 bit micro controller
  • Common driver interface for easy exchange of the PC interface type
  • Features filtering, preprocessing, time stamped storage of CAN messages
  • High-/Low-Speed bus interface optional
  • Galvanic isolation optional

Fields of application

Covering a wide range of industrial and automotive CAN applications, this is a powerful and economic active CAN PCI interface with two CAN channels. Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. The board is supported by the IXXAT driver packages and higher layer protocol APIs as well as by the IXXAT tool suite.

Technical specifications

PC bus interface PCI-Bus (V2.2), 32 Bit / 33 MHz, 5 Volt or 3.3 Volt
PC address range Plug & Play, 16 kB memory mapped and 128 bytes I/O area
Interrupts INT A, Plug & Play
Microcontroller Infineon XC161
CAN controller TwinCAN (two CAN channels); CAN 2.0 A/B
CAN bus interface ISO 11898-2 according to CiA 303-1, Sub D9 connector, optional high-/low-speed bus interface (ISO 11898-3) switchable via software
Power supply 5 V DC, 100 mA typ.; 3.3 V DC, 185 mA typ.
Temperatur range -20 ºC … +70 ºC
Galvanic isolation optional (1 kV, 1 sec.)
Temperature range -40 ºC … +85 ºC
Certification CE, CSA/UL, FCC, EN 60601-1
Size Approx. 123 x 90 mm

Contents of delivery

  • PC/CAN interface card, manual
  • CAN driver VCI for Windows 2000, XP, Vista, Windows 7
  • Simple CAN monitor “miniMon”

Technology Partners