iPC-I XC16/PMC Active PMC board 2 x CAN (High-/Low-Speed), LIN

The iPC-I XC16/PMC is an active PMC board for 5 V and 3.3 V PMC bus systems with high/low-speed CAN interface and LIN interface. The on-board microcontroller offers filtering, preprocessing, transmission and time stamped storage of the CAN messages.

Features and benefits

  • Active CAN board with 16 bit micro controller
  • Common driver interface for easy exchange of the PC interface type
  • Features filtering, preprocessing, time stamped storage of CAN messages
  • High-/Low-Speed bus interface optional
  • Galvanic isolation

Fields of application

Covering a wide range of industrial and automotive CAN applications, this is a powerful and economic active CAN PMC interface with two CAN and one LIN channel. Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. The board is supported by the IXXAT driver packages and higher layer protocol APIs as well as by the IXXAT tool suite.

Technical specifications

PC bus interface PMC Bus (V2.2), 32 Bit / 33 MHz, 5 Volt or 3.3 Volt
PC address range Plug & Play, 16 kB memory mapped and 128 bytes I/O area
Interrupts INT A, Plug & Play
Microcontroller Infineon XC161
CAN controller TwinCAN (two CAN channels); CAN 2.0 A/B
CAN bus interface ISO 11898-2 and ISO 11898-3, Sub D9 connector according to CiA 303-1, high-/low-speed bus interface switchable via software
LIN controller TJA1020
LIN bus interface ISO 9141/LIN, Master/Slave mode switchable via software, galvanic isolation
Power supply 5 V DC, 100 mA typ.; 3.3 V DC, 120 mA typ.
Temperatur range -20 ºC … +70 ºC
Galvanic isolation
Temperature range -40 ºC … +85 ºC
Certification CE, FCC
Size Approx. 74 x 149 mm single CMC

Contents of delivery

  • PC/CAN interface card, manual
  • CAN driver VCI for Windows 2000, XP, Vista, Windows 7
  • Simple CAN monitor “miniMon”

Technology Partners