canAnalyser-lite

The low-cost introduction to professional CAN analysis

Overview
As the "little brother" of the canAnalyser, the canAnalyser-lite provides the most important functions required for CAN analysis in a compact form.

Offering functions for online monitoring of bus traffic, for single-shot or cyclic transmission of messages and complete message sequences, for recording bus traffic with various trigger conditions and for statistical evaluation of bus traffic, it possesses the main functions for the analysis of Controller Area Network systems while providing a low-cost introduction.

Since the configuration files and the project databases of both versions are compatible, it can be easily upgraded to the full version, if required.

Scope of functions
Like the canAnalyser, the canAnalyser-lite is based on the reliable modular concept. The lite version contains the following modules:

Receive module for receiving and displaying CAN messages
Transmit module for transmitting messages
Trace module for recording messages with filter and trigger functionality
Sequencer module for transmitting message sequences
Statistic module for displaying parameters and message frequencies

These modules correspond to those of the full version and are managed by means of the control panel that is also supplied.

In contrast to the canAnalyser, the canAnalyser-lite does not allow multiple instances of a module, has no open programming interface, and, can only be operated with one CAN bus.

Highlights

Multilingual 32-bit software for Windows 2000/XP
Support of all CAN interfaces supplied by IXXAT
Support of 11- and 29-bit identifiers (CAN 2.0A/2.0B)
Timestamp for receive objects with a resolution of up to 500 µsec (depending on the used hardware)
Passive mode (no transmission of Ack bit and error frames, thus no interference of the CAN system by the canAnalyser
Detection and display of error frames
Online trace on hard disk with various trigger conditions
Display of the CAN controller status and the bus load

Hardware requirements
- PC with Windows 2000/XP
- IXXAT CAN interface with SJA1000 CAN controller and CAN driver
VCI V2

Contents of delivery
- Software as single user license, consisting of control panel,
receive module, transmit module, trace module, sequencer
module, statistic module
- Database editor
- User's manual
- USB license key

Further information
A free demo version is available on our homepage
The product homepage, with tutorial, tips and support can be found at www.cananalyser.com.

Optionally available modules
- CANopen Module
- DeviceNet Module
- SAE J1939 Module

Additional application
LIN analysis: With the LIN2CAN device it is possible to
monitor and transmit LIN messages with the canAnalyser. The LIN2CAN is configured as a gateway and converts the
LIN messages into CAN messages and vice versa.

Comparison of functions of the
canAnalyser and the canAnalyser-lite

	canAnalyser	canAnalyser-lite
Receive Module	x	x
Transmit Module	x	x
Trace Module	x	x
Sequencer Module	x	x
Graphic Module	x	-
Statistic Module	x	x
Signal Module	x	-
CANopen Module	o	o
DeviceNet Module	o	o
SAE J1939 Module	o	o
Two channel capability	x	-
Open programming interface	x	-
Scripting Host	x	-
Multiple Module instances	x	-

x included in delivery specification
o optional
- not support

Order number

1.02.0166.00000

canAnalyser-lite