CAN-Repeater
ISO/IS 11898-2 CAN Repeater (with Low-Speed Option)
The CAN Repeater is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. One special feature of the Repeater is that it can separate a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.As an option, the Repeater can also be equipped with a low-speed bus interface in accordance with ISO/IS 11898-3, allowing operation of the Repeater as a high/low-speed converter. Its galvanic isolation isolates both CAN segments from each other as well as from the power supply.
Technical Data
| Display | Transmit (2 green LEDs), defective segment (2 red LEDs) |
| CAN bus interface | ISO/IS 11898-2 with CAN choke. Terminals (CAN-High, CAN-Low, CAN-GND). CAN 1, CAN 2 and power supply are galvanic isolated against each other. CAN termination resistors are integrated (can be disabled). |
| Baudrate | Up to 888 kbps |
| Delay | 200 ns (corresponds ~40 m (~120ft.) bus length) |
| Power supply | 9-35 V DC, 1.5 W typ., through terminals |
| Temperature range | -20 ºC ... +70 ºC |
| Housing, size | Plastic enclosure, 110 x 75 x 22 mm |
Contents of delivery
- CAN-Repeater, Quick reference
Optional
- 1x ISO/IS 11898-3 Low-Speed Businterface
- Further options on request
Order number
|