CAN@net II/VCI
Intelligent CAN Adapter with
Ethernet Interface
The CAN@net II allows simple, flexible access from a PC to CAN systems via Ethernet. Because of its ability to support the TCP/IP protocol, the CAN@net II allows for worldwide direct connection to a PC, implementation in an LAN, or, communication with the gateway via the Internet. The main area of application of the CAN@net II is to provide remote access to CAN systems requiring both service and remote maintenance.With the VCI CAN driver included in the delivery, the CAN@net II can be operated in the same way as all IXXAT CAN PC interface boards. Therefore, all VCI-based CAN-programs and tools can be run with the CAN@net II. The VCI CAN driver is also capable of communicating via a PC with up to 128 CAN@net II devices simultaneously.
In addition to the CAN@net II/VCI, IXXAT also offers the CAN@net II/Generic interface, which is addressed via a standard TCP/IP socket interface. This makes it possible to connect CAN@net II to any processor and operating system platforms (see also CAN@net II/Generic interface in the section "CAN gateways").
Technical Data
| Ethernet-Interface | 10/100 Mbit/s Ethernet (10-Base T/100-base T), Autodetect, Connector RJ45, Auto crossover |
| IP address allocation | DHCP, via PC tool |
| Microcontroller | Freescale MCF5235, 150 MHz |
| Memory extension | 8 MByte DRAM, 4 MByte Flash |
| CAN controller | 1 x SJA1000 |
| CAN bus interface | ISO/IS 11898-2, Sub D9 connector according to DS102, galvanically decoupled |
| Power supply | 9-32 V DC, 3 W |
| Size | 22.5 x 100 x 115 mm |
| Housing | Plastic housing for top hat rail mounting |
| Temperature range | -20 ºC ... +70 ºC |
| Certification | CE, FCC, CSA |
Contents of delivery
- CAN@net II/VCI, user's manual
- CAN driver VCI for Windows 2000, XP
- Simple CAN monitor "miniMon"
|