CAN@net II // Generic
CAN-Ethernet Gateway and
CAN-Ethernet-CAN Bridge
CAN-Ethernet Gateway
In the gateway mode the CAN@net II/Generic is connected to a PC or to a controller platform via TCP/IP. The application program on the host communicates via a standard TCP/IP socket and uses a simple ASCII protocol. The CAN@net II/Generic offers simple, flexible access to CAN systems via a LAN or via the Internet.
CAN-Ethernet-CAN Bridge
Using 2 CAN@net II/Generic, a CAN-Ethernet-CAN bridge can be implemented. This bridge allows for the exchange of CAN messages between two CAN systems via TCP/IP where filter tables can be defined.
The configuration of the TCP/IP parameters can be performed using an easy to handle PC tool with automatic device detection. The configuration of the bridge functionality and the CAN communication is supported by an implemented webserver.
Technical Data
| PC bus interface | 10/100 Mbit/s Ethernet (10-Base T/100-base T), Autodetect, RJ45 connector |
| IP address allocation | DHCP, via PC tool |
| Microcontroller | Freescale MCF5235, 150 MHz |
| Memory extension | 8 Mbyte DRAM, 4 Mbyte Flash |
| CAN controller | 1 x Philips SJA1000 |
| CAN bus interface | ISO/IS 11898-2, Sub D9 galvanically decoupled (500V) |
| Current supply | 9-32 V DC, 3 W |
| Temperature range | -20 ºC ... +70 ºC |
| Certification | CE, FCC, CSA |
| Housing | Plastic housing for top hat rail mounting |
| Size | approx. 22,5 x 100 x 115 mm |
Contents of delivery
- CAN@net II/Generic
- User manual
- Sample programs
|