PC-104/PCI
Passive CAN interface for PCI bus systems
This is a passive board (no microprocessor on board) for the PCI bus with up to two CAN channels. It represents a very economic solution for connecting a PC to a CAN network in applications where there are low performance requirements.
Technical Data
| PC bus interface | PCI Bus (specification 2.1), 32 Bit, 33MHz, 5V |
| PC address range | Plug & Play, 1024 bytes memory mapped and 128 bytes I/O area |
| Interrupts | INT A, Plug & Play |
| Microcontroller | None |
| CAN controller | Up to two Philips SJA 1000 |
| CAN bus interface | ISO/IS 11898-2, Sub D9 connector according to DS 102, optional galvanic decoupled |
| Power supply | 5 V DC, 300 mA typ., provided by PC |
| Temperatur range | -20 ºC ... +70 ºC |
| Certification | CE, CSA/UL |
| Size | Approx. 95 x 125 mm |
Order options
- Galvanic decoupling
Contents of delivery
- PC/CAN interface card, manual
- CAN driver VCI for Windows 2000, XP
- Simple CAN monitor "miniMon"
Order number
|