iPC-I 165
Intelligent CAN interface
for ISA bus systems
This is a powerful and economic solution covering a wide range of CAN applications requiring an active CAN board with one or two CAN channels.Some of the features offered by the on-board microcontroller include filtering, preprocessing, transmission and time stamped storage of the CAN messages.
Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load.
In combination with the CAN driver (VCI, part of delivery), the iPC-I 165 allows an easy integration of PC supported CAN applications. In addition, the iPC-I 165 is well-suited for use both with the IXXAT analysis and configuration tools and as a CANopen network controller.
Technical Data
| PC bus interface | ISA-Bus, 16 Bit |
| PC address range | C000h-FE00h (memory mapped), adjustable in 16 kB steps |
| Interrupts | IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 |
| Microcontroller | Infineon SAB C165, 20 MHz |
| Memory extension | 512 kByte SRAM, 512 kByte Flash, 8 kByte DPRAM |
| CAN controller | Up to two Philips SJA 1000 |
| CAN bus interface | ISO/IS 11898-2, Sub D9 connector according to DS 102, optional galvanic decoupling |
| Power supply | 5 V DC, 250 mA typ., provided by PC |
| Temperatur range | 0 ºC ... +50 ºC |
| Certification | CE, CSA/UL |
| Size | Approx. 110 x 220 mm |
Order options
- Galvanic decoupled
Contents of delivery
- PC/CAN interface card and manual
- CAN driver VCI for Windows 2000, XP
- Simple CAN monitor "miniMon"
Order number
|