iPC-I XC16/PCI
Intelligent CAN interface
for 5 V and 3.3 V PCI bus systems
with optional Low Speed bus interface
Covering a wide range of industrial and automotive CAN applications, this is a powerful and economic solution for an active CAN board with two CAN channels. The interface is state-of-the-art, supports PCI, and can be easily installed by Plug & Play. Some of the features offered by the on-board microcontroller include filtering, preprocessing, transmission and time stamped storage of the CAN messages.Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data, even in systems with a high bus load. In combination with the CAN driver (VCI, part of delivery), the iPC-I XC16/PCI allows for the seamless integration of PC- supported CAN applications. In addition, the iPC-I XC16/PCI is well-suited for use with the IXXAT analysis and configuration tools and as a CANopen network controller.
Technical Data
| PC bus interface | PCI-Bus (2.2), 32 Bit / 33 MHz, 5 Volt or 3.3 Volt |
| PC address range | Plug & Play, 16 kB memory mapped and 128 bytes I/O area |
| Interrupts | INT A, Plug & Play |
| Microcontroller | Infineon XC161, 40 MHz |
| Memory extension | 512 kByte SRAM, 128 kByte FLASH, 8 kByte DPRAM |
| CAN controller | Internal TwinCAN module (two CAN channels) |
| CAN bus interface | ISO/IS 11898-2 according to DS 102, Sub D9 connector, optional galvanic decoupling and high-/low-speed bus interface (ISO/IS 11898-3) switchable via software |
| Power supply | 5 V DC, 100 mA typ.; 3.3 V DC, 120 mA typ. |
| Temperature range | -20 ºC ... +70 ºC |
| Certification | CE, FCC, CSA/UL |
| Size | Approx. 89 x 124 mm |
Order options Order number
|