iPC-I XC16/PCIe
Intelligent CAN interface for PCI express bus systems
This is a powerful and economic solution for an active CAN board with two CAN channels. The interface is state-of-the-art, supports PCI express, and can be easily installed by Plug & Play. Some of the features offered by the on-board microcontroller include filtering, pre-processing, transmission and time-stamped storage of the CAN messages.Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data even in systems with a high bus load. In combination with the CAN driver (VCI, part of delivery), the iPC-I XC16/PCIe allows for the seamless integration of PC- supported CAN applications. In addition, the iPC-I XC16/PCIe is well-suited for use with the IXXAT analysis and configuration tools, and, for use as a CANopen network controller.
Technical Data
| PC bus interface | PCIe (r1.0a), x1 link (2,5 Gbps per direction) |
| PC address range | Plug & Play, 16 kB memory mapped and 128 bytes I/O area |
| Interrupts | INT A, Plug & Play |
| Microcontroller | Infineon XC161, 40 MHz |
| Memory extension | 512 kByte SRAM, 128 kByte FLASH, 8 kByte DPRAM |
| CAN controller | Internal TwinCAN module (two CAN channels) |
| CAN bus interface | ISO/IS 11898-2 high-speed, Sub D9 connector according to DS 102, Galvanic decoupled |
| Power supply | 12 V DC, 60 mA typ.; 3.3 V DC, 200 mA typ. |
| Temperature range | 0 ºC ... +70 ºC |
| Certification | CE, FCC |
| Size | Approx. 90 x 150 mm |
Contents of delivery
- PC/CAN interface card and manual
- CAN driver VCI for Windows 2000/XP
- Simple CAN monitor "miniMon"
Order number
|