Wednesday, 17 April – Friday, 19 April 2024 | Melbourne Showgrounds

CAN Automotion Pty Ltd at FutureAg Expo 2024 powered by Agritechnica

Visit us in Melbourne!


The show will be held across three days annually commencing Wednesday, 17 April – Friday, 19 April 2024. Open to the industry 8.30am to 4.30pm (Wednesday and Thursday) and 8.30am to 4.00pm (Friday).


This inaugural event will be at Melbourne Showgrounds, Ascot Vale, Victoria, Australia – the largest participation rate in events in Victoria, the largest exporting state of agricultural products in Australia.

Venue FutureAg

Visit us at Stand 252

ESX Control Units

Data Sheet

The powerful electronic compact control unit ESX.4cl-ag is a flagship among the programmable control units in the STW portfolio. It offers extensive functionality in a very compact and robust die-cast aluminium housing. This makes the ESX.4cl-ag suitable for the most demanding applications, particularly in mobile machines with limited installation space. The specially designed SPE interfaces are capable of implementing the new High-Speed ISOBUS standard.

  • SIL2, PL d, AG PL d
  • Aurix TC399 Multicore, 32bit, 300 MHz
  • 6 MB RAM, 256 kByte F-RAM
  • 16 MB Internal Flash, 16 MB External Flash
  • Optional Co-processor i.MX6 Ultralite
  • 6 CAN interfaces, 1 LIN or RS232 Interface
  • Ethernet
  • 58 Inputs (SENT Support)
  • 59 Outputs (Low-side, High-side, 10A Half Bridges)

Data Sheet

The ESX.4ct is a small compact and freely programmable control unit featuring the latest processor and input/output technologies. With compact housing, it facilitates the automation of small machines and attachments and can also be used as a controller for dedicated tasks in more complex systems. A range of different I/O configurations are available. The inputs can be configured for different functionalities and the half-bridge outputs can also be used to drive PVG valves.

  • Safety Level PL b
  • Aurix TC367 dual core 32 bit, 300 MHz
  • Internal: 576 kB RAM, 4 MB Flash
  • External: EEPROM 32 kB (optional max. 284 kB)
  • 2 (optional 3) CAN interfaces, CAN FD ready, ISOBUS ISO 11783-3, 1 RS232 (or 1 LIN Spec 2.2A optional)
  • Variants with 14, 18 or 22 inputs
  • SENT interface available for 2 input types
  • Variants with 13, 9 or 5 outputs up to 8 half bridges supporting PVG valves
  • 1 sensor supply 5 V ... 12 V, max. 250 mA
  • 6-axis accelerometer & gyroscope (optional), Bluetooth LE v5.1 with internal antenna (optional)

Temperature Transducers
Data Sheet

The BCX.4cs-ag is designed as a central on-board control unit for agricultural implements with and without ISOBUS. It handles the protection, distribution, switching and control of the electrical energy on these implements.

Thanks to the certified ISOBUS hardware, nothing stands in the way of operation on the ISOBUS. Alternatively, the BCX.4cs-ag can be operated via a separate display.

In addition to protecting the individual circuits, larger loads, such as lights and motors, can also be switched or controlled directly. Software-configurable multifunctional inputs are available for reading in signals on the attachment.

  • Aurix TC367 Multicore 32 bit, 300 MHz
  • Internal: 576 kB RAM, 4 MB Flash
  • External: 32 kB EEPROM
  • 1 CAN interface, ISOBUS ISO 11783-31
  • 12 inputs SENT, NAMUR
  • 20 outputs, 8 half briges up to 10 A, 4 high side switches with up to 15 A
  • 1 Uext display 2A
  • 1 sensor supply

Temperature Transducers
Data Sheet
The ESX.3cs is a compact, robust and efficient control unit. In addition to the ESX.3cm, an ESX.3cs (c = compact, s = small) rounds off the third generation of ESX control units.
  • TriCore TC 1798 32 bit, 300 MHz
  • Internal: 288 kB SRAM, 4 MB Flash
  • External: 8 MB SDRAM
  • 32 kB EEPROM
  • 2 CAN Interfaces
  • Ethernet interface (optional)
  • Either RS232 or LIN interface
  • 18 inputs (SENT support)
  • 17 outputs

ESX I/O modules

Temperature Transducers
Data Sheet
The cost-optimized ESX.iot works as a CAN slave module and extends the I/O capabilities of a central control unit. Placed close to sensors or actuators the I/O unit helps to reduce installation effort and the cost and weight of the system. It fulfils safety requirements (PL b) and fits perfectly into offroad machinery used in agriculture, forestry, construction, mining, or municipal applications. Integration in STW’s openSYDE software tool ensures intuitive system design.
  • Safety Level PL b
  • 1 CAN interface, CAN FD ready, CAN Wake-up
  • Inputs: 14/18/22 (12 bit, NAMUR support)
  • Outputs: 13/9/5 (Half-bridges with PVG support, high-side switches)
  • Options: 6-axis accelerometer & gyroscope

Harvest series joystick

Temperature Transducers
Harvest series joystick (Agricultural vehicles)
Data Sheet

Sure Grip’s Harvest Series sets the standard for rugged, weather-resistant joysticks. Developed to be a long-lasting solution for electronic control and built to withstand the seasonal demands faced by agricultural harvesting machines, the Harvest Series joystick’s robust design and durable construction is ready to tackle the toughest environments to help you get the job done.

Made with high-quality materials and expert craftsmanship, the Harvest Series joystick is built to last, providing reliable performance for years to come. Sealed to IP67 to handle everything from extreme heat to extreme cold temperatures and wet conditions, it is also field serviceable to maximize uptime.

  • Smooth and precise control
  • Ergonomic handle design
  • Durable construction including IP67 sealing
  • Versatile mounting options
  • Multiple output options, including digital and analog
  • Easily replaceable modular design
  • Configurable base/joystick

Request A Quote